MTN satin varnish for paintings 400ml

• Transparent varnish formulated with acrylic resins.
• MTN PRO Varnish for paintings is a product indicated as a final coat to protect oil and acrylic paintings against humidity, grease, UV rays, dust, pollution and handling, allowing the work to maintain its properties without yellowing or cracking.
• Very fast drying by evaporation in a total of 12 hours. Repainting after 1 h.
• For the varnishing of oil paints, the total drying times must be observed before using the product.
• It can also be applied on other types of materials to give them protection.
• INSTRUCTIONS FOR USE
• - Shake the aerosol very well before use approximately one minute after hearing the noise of the mixer.
  the sound of the mixer is heard.
• - Apply to clean, dry surfaces. Apply to completely dry colours in thin
  dry and in thin layers at a distance of 15-20 cm. For a good finish, three thin coats are
  For a good finish, it is always better to apply three thin coats than one thick coat.
• - On old and/or deteriorated works, proceed to clean and restore the surface, and then proceed to
  and restoration of the surface, to be followed by varnishing.
• Oil paints may be dry for varnishing several months after application (even a year), depending on the thickness of the layer applied. It is advisable to
  test a small area and/or follow the instructions of the paint manufacturer.
  manufacturer's instructions.
• - Invert the aerosol to purge the valve after use, if the diffuser is clogged, replace it with a new one.
  replace with a new one.
• - Use in well ventilated areas.
• To clean areas and tools use pre-oil or turpentine essence.

• Colour: satin clear.
• Quantity: 400 ml.

Brand: Montana Colors.