There are no reviews about this product yet
In stock
SKU
AEROSOL-BARNIZ-PROTECTOR-INTERIORES-MONTANA-400ML
Montana Colors Protective varnish for interiors in spray MTN 400ml is available to buy in increments of 1
Technical description
MTN interior protective varnish 400ml
- MTN PRO Interior Protective Varnish is a water-based acrylic varnish spray, with fast drying and excellent characteristics, which offers high quality finishes and durability on multiple surfaces.
- Designed to increase the durability of furniture and interior objects, when applied directly on a porous substrate or on paint, it uniforms the finish, increasing the durability of the color.
- Depending on the porosity of the material to be varnished, it may require the application of two or three coats.
- Does not yellow.
- Repaintable after 30-60 minutes with the same varnish.
- Total drying in 12 hours.
- Instructions for use:
- - Shake the aerosol very well before using, approximately one minute after hearing the noise of the mixer. Also reversing the pot.
- - Apply to clean and dry surfaces, trying to keep the bottle as vertical as possible.
- - On wood: properly prepare the wood before application. On new wood it can be applied directly, after preparing it. Sand any imperfections or roughness if necessary. On painted or varnished wood, remove peeling and non-adhering paint and varnish by stripping, scraping or sanding.
- - On plastics: first apply a suitable primer depending on the type of plastic.
- - Do not apply directly to metal.
- - For other types of surfaces, do a previous test.
- - Applicable on water-based and solvent-based acrylic paints, after drying.
- - Applicable on chalky acrylic products.
- - Apply in thin layers to obtain better results, three thin layers are always better than one thick one. It is recommended to apply 2 or 3 coats depending on the porosity of the surface.
- - Do not varnish in full sun or with dew.
- - Utensils or product stains can be cleaned with soap and water.
- - Do not apply to connected equipment and use in well-ventilated areas.
- - Once finished, clean the spray nozzle by holding it in an inverted position and pressing until only gas comes out, without product. If the nozzle becomes clogged you will have to replace it with a new one.
- Quantity: 400 ml.
Brand: Montana Colors.
| Brand | Montana Colors |
|---|
CATEGORIES:











