There are no reviews about this product yet
In stock
SKU
3013642102855
Special Price £7.61 Regular Price £9.20
Transcryl Lefranc & amp; Bourgeois strong> div>
- This method will allow you to reproduce, through the transfer, an image printed on glossy paper, unvarnished, black and white or color photocopies. li>
- The film can be later worked with aging varnish or crackle or relief gel. li>
- Dissolve in water. li>
- Avoid transferring postcards, as well as prints protected with varnish. li>
- Glass bottle 75 ml. li> ul>
- How to use: li>
- Transcryl application: Protect your work table with a sheet of plastic or rubber. li>
- Apply 1 layer of Transcryl on top of the cut paper, pre-printed image to be transferred. li>
- Exceed with 1 cm of Transcryl all the outline of the image you want to transfer. li>
- Allow it to dry for 20 minutes. Next, apply the second layer, superimposing it perpendicular to the first. Li>
- Repeat this operation three times, superimposing the different layers perpendicularly to each other. Li> < li> Let it dry well before applying the next coat, about 15 or 20 minutes. li>
- After 24 hours of drying: Cut the contour of the plasticized print leaving a margin of 0.5 cm. li>
- Soak the paper in warm water for 20 to 30 minutes so that the part you want to transfer peels off more easily. li>
- Remove the paper from the printout. n: Peel back the paper from the back of the print, by wrapping it with your fingers or using a sponge with a soft pad. li>
- Remove as well. the plastic film in which the image is reproduced. li>
- Plastic film drying time: Extend the obtained plastic film (Transfer) in a smooth and smooth surface with an absorbent paper. li>
- Allow it to dry for 6 hours. li>
- Paste the transfer: Apply 1 layer of Transcryl on top of a support. li>
- Then stick your transfer and remove the air bubbles with a hard curl, or with your fingers. Let the finished object dry for 24 hours. Li> ul>
| Brand | Lefranc and Bourgeois |
|---|











